Skip to content

GitLab 14 changes

DETAILS: Tier: Free, Premium, Ultimate Offering: Self-managed

This page contains upgrade information for minor and patch versions of GitLab 14. Ensure you review these instructions for:

  • Your installation type.
  • All versions between your current version and your target version.

For more information about upgrading GitLab Helm Chart, see the release notes for 5.0.

14.10.0

  • Before upgrading to GitLab 14.10, you must already have the latest 14.9.Z installed on your instance. The upgrade to GitLab 14.10 executes a concurrent index drop of unneeded entries from the ci_job_artifacts database table. This could potentially run for multiple minutes, especially if the table has a lot of traffic and the migration is unable to acquire a lock. It is advised to let this process finish as restarting may result in data loss.

  • If you run GitLab with external PostgreSQL, particularly AWS RDS, ensure you upgrade PostgreSQL to patch levels to a minimum of 12.7 or 13.3 before upgrading to GitLab 14.8 or later.

    In 14.8 for GitLab Enterprise Edition and in 15.0 for GitLab Community Edition a GitLab feature called Loose Foreign Keys was enabled.

    After it was enabled, we have had reports of unplanned PostgreSQL restarts caused by a database engine bug that causes a segmentation fault.

    For more information, see issue 364763.

  • Upgrading to patch level 14.10.3 or later might encounter a one-hour timeout due to a long running database data change, if it was not completed while running GitLab 14.9.

    FATAL: Mixlib::ShellOut::CommandTimeout: rails_migration[gitlab-rails]
    (gitlab::database_migrations line 51) had an error:
    [..]
    Mixlib::ShellOut::CommandTimeout: Command timed out after 3600s:

    A workaround exists to complete the data change and the upgrade manually.

Linux package installations

  • In GitLab 14.10, Gitaly has introduced a new runtime directory. This directory is intended to hold all files and directories Gitaly needs to create at runtime to operate correctly. This includes, for example, internal sockets, the Git execution environment, or the temporary hooks directory.

    This new configuration can be set via gitaly['runtime_dir']. It replaces the old gitaly['internal_socket_dir'] configuration. If the internal socket directory is not explicitly configured, sockets will be created in the runtime directory.

    Support for gitaly['internal_socket_dir'] will be removed in 15.0.

14.9.0

  • Database changes made by the upgrade to GitLab 14.9 can take hours or days to complete on larger GitLab instances. These batched background migrations update whole database tables to ensure corresponding records in namespaces table for each record in projects table.

    After you upgrade to 14.9.0 or a later 14.9 patch version, batched background migrations must finish before you upgrade to a later version.

    If the migrations are not finished and you try to upgrade to a later version, you see errors like:

    Expected batched background migration for the given configuration to be marked as 'finished', but it is 'active':

    Or

    Error executing action `run` on resource 'bash[migrate gitlab-rails database]'
    ================================================================================
    
    Mixlib::ShellOut::ShellCommandFailed
    ------------------------------------
    Command execution failed. STDOUT/STDERR suppressed for sensitive resource
  • GitLab 14.9.0 includes a background migration ResetDuplicateCiRunnersTokenValuesOnProjects that may remain stuck permanently in a pending state.

    To clean up this stuck job, run the following in the GitLab Rails Console:

    Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "ResetDuplicateCiRunnersTokenValuesOnProjects").find_each do |job|
      puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("ResetDuplicateCiRunnersTokenValuesOnProjects", job.arguments)
    end
  • If you run GitLab with external PostgreSQL, particularly AWS RDS, ensure you upgrade PostgreSQL to patch levels to a minimum of 12.7 or 13.3 before upgrading to GitLab 14.8 or later.

    In 14.8 for GitLab Enterprise Edition and in 15.0 for GitLab Community Edition a GitLab feature called Loose Foreign Keys was enabled.

    After it was enabled, we have had reports of unplanned PostgreSQL restarts caused by a database engine bug that causes a segmentation fault.

    For more information, see issue 364763.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

14.8.0

  • If upgrading from a version earlier than 14.6.5, 14.7.4, or 14.8.2, review the Critical Security Release: 14.8.2, 14.7.4, and 14.6.5 blog post. Updating to 14.8.2 or later resets runner registration tokens for your groups and projects.

  • The agent server for Kubernetes is enabled by default on Omnibus installations. If you run GitLab at scale, such as the reference architectures, you must disable the agent on the following server types, if the agent is not required.

    • Praefect
    • Gitaly
    • Sidekiq
    • Redis (if configured using redis['enable'] = true and not via roles)
    • Container registry
    • Any other server types based on roles(['application_role']), such as the GitLab Rails nodes

    The reference architectures have been updated with this configuration change and a specific role for standalone Redis servers.

    Steps to disable the agent:

    1. Add gitlab_kas['enable'] = false to gitlab.rb.
    2. If the server is already upgraded to 14.8, run gitlab-ctl reconfigure.
  • GitLab 14.8.0 includes a background migration PopulateTopicsNonPrivateProjectsCount that may remain stuck permanently in a pending state.

    To clean up this stuck job, run the following in the GitLab Rails Console:

    Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "PopulateTopicsNonPrivateProjectsCount").find_each do |job|
      puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("PopulateTopicsNonPrivateProjectsCount", job.arguments)
    end
  • If upgrading from a version earlier than 14.3.0, to avoid an issue with job retries, first upgrade to GitLab 14.7.x and make sure all batched migrations have finished.

  • If upgrading from version 14.3.0 or later, you might notice a failed batched migration named BackfillNamespaceIdForNamespaceRoute. You can ignore this. Retry it after you upgrade to version 14.9.x.

  • If you run GitLab with external PostgreSQL, particularly AWS RDS, ensure you upgrade PostgreSQL to patch levels to a minimum of 12.7 or 13.3 before upgrading to GitLab 14.8 or later.

    In 14.8 for GitLab Enterprise Edition and in 15.0 for GitLab Community Edition a GitLab feature called Loose Foreign Keys was enabled.

    After it was enabled, we have had reports of unplanned PostgreSQL restarts caused by a database engine bug that causes a segmentation fault.

    For more information, see issue 364763.

14.7.0

  • If upgrading from a version earlier than 14.6.5, 14.7.4, or 14.8.2, review the Critical Security Release: 14.8.2, 14.7.4, and 14.6.5 blog post. Updating to 14.7.4 or later resets runner registration tokens for your groups and projects.

  • GitLab 14.7 introduced a change where Gitaly expects persistent files in the /tmp directory. When using the noatime mount option on /tmp in a node running Gitaly, most Linux distributions run into an issue with Git server hooks getting deleted. These conditions are present in the default Amazon Linux configuration.

    If your Linux distribution manages files in /tmp with the tmpfiles.d service, you can override the behavior of tmpfiles.d for the Gitaly files and avoid this issue:

    sudo printf "x /tmp/gitaly-%s-*\n" hooks git-exec-path >/etc/tmpfiles.d/gitaly-workaround.conf

    This issue is fixed in GitLab 14.10 and later when using the Gitaly runtime directory to specify a location to store persistent files.

Linux package installations

  • In GitLab 14.8, we are upgrading Redis from 6.0.16 to 6.2.6. This upgrade is expected to be fully backwards compatible.

    Follow the zero-downtime instructions for upgrading your Redis HA cluster.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • LFS objects import and mirror issue in GitLab 14.6.0 to 14.7.2. When Geo is enabled, LFS objects fail to be saved for imported or mirrored projects. This bug was fixed in GitLab 14.8.0 and backported into 14.7.3.

  • There is an issue in GitLab 14.2 through 14.7 that affects Geo when the GitLab-managed object storage replication is used, causing blob object types to fail synchronization.

    Since GitLab 14.2, verification failures result in synchronization failures and cause a resynchronization of these objects.

    As verification is not yet implemented for files stored in object storage (see issue 13845 for more details), this results in a loop that consistently fails for all objects stored in object storage.

    For information on how to fix this, see Troubleshooting - Failed syncs with GitLab-managed object storage replication.

14.6.0

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • LFS objects import and mirror issue in GitLab 14.6.0 to 14.7.2. When Geo is enabled, LFS objects fail to be saved for imported or mirrored projects. This bug was fixed in GitLab 14.8.0 and backported into 14.7.3.

  • There is an issue in GitLab 14.2 through 14.7 that affects Geo when the GitLab-managed object storage replication is used, causing blob object types to fail synchronization.

    Since GitLab 14.2, verification failures result in synchronization failures and cause a resynchronization of these objects.

    As verification is not yet implemented for files stored in object storage (see issue 13845 for more details), this results in a loop that consistently fails for all objects stored in object storage.

    For information on how to fix this, see Troubleshooting - Failed syncs with GitLab-managed object storage replication.

14.5.0

  • Connections between Workhorse and Gitaly use the Gitaly backchannel protocol by default. If you deployed a gRPC proxy between Workhorse and Gitaly, Workhorse can no longer connect. As a workaround, disable the temporary workhorse_use_sidechannel feature flag. If you need a proxy between Workhorse and Gitaly, use a TCP proxy. If you have feedback about this change, go to this issue.

  • In 14.1 we introduced a background migration that changes how we store merge request diff commits, to significantly reduce the amount of storage needed. In 14.5 we introduce a set of migrations that wrap up this process by making sure that all remaining jobs over the merge_request_diff_commits table are completed. These jobs have already been processed in most cases so that no extra time is necessary during an upgrade to 14.5. However, if there are remaining jobs or you haven't already upgraded to 14.1, the deployment may take multiple hours to complete.

    All merge request diff commits automatically incorporate these changes, and there are no additional requirements to perform the upgrade. Existing data in the merge_request_diff_commits table remains unpacked until you run VACUUM FULL merge_request_diff_commits. However, the VACUUM FULL operation locks and rewrites the entire merge_request_diff_commits table, so the operation takes some time to complete and it blocks access to this table until the end of the process. We advise you to only run this command while GitLab is not actively used or it is taken offline for the duration of the process. The time it takes to complete depends on the size of the table, which can be obtained by using select pg_size_pretty(pg_total_relation_size('merge_request_diff_commits'));.

    For more information, refer to this issue.

  • GitLab 14.5.0 includes a background migration UpdateVulnerabilityOccurrencesLocation that may remain stuck permanently in a pending state when the instance lacks records that match the migration's target.

    To clean up this stuck job, run the following in the GitLab Rails Console:

    Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "UpdateVulnerabilityOccurrencesLocation").find_each do |job|
      puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("UpdateVulnerabilityOccurrencesLocation", job.arguments)
    end
  • Upgrading to 14.5 (or later) might encounter a one hour timeout owing to a long running database data change.

    FATAL: Mixlib::ShellOut::CommandTimeout: rails_migration[gitlab-rails]
    (gitlab::database_migrations line 51) had an error:
    [..]
    Mixlib::ShellOut::CommandTimeout: Command timed out after 3600s:

    There is a workaround to complete the data change and the upgrade manually

  • As part of enabling real-time issue assignees, Action Cable is now enabled by default. For self-compiled (source) installations, config/cable.yml is required to be present.

    Configure this by running:

    cd /home/git/gitlab
    sudo -u git -H cp config/cable.yml.example config/cable.yml
    
    # Change the Redis socket path if you are not using the default Debian / Ubuntu configuration
    sudo -u git -H editor config/cable.yml

Self-compiled installations

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

14.4.4

  • For zero-downtime upgrades on a GitLab cluster with separate Web and API nodes, you must enable the paginated_tree_graphql_query feature flag before upgrading GitLab Web nodes to 14.4. This is because we enabled paginated_tree_graphql_query by default in 14.4, so if GitLab UI is on 14.4 and its API is on 14.3, the frontend has this feature enabled but the backend has it disabled. This results in the following error:

    bundle.esm.js:63 Uncaught (in promise) Error: GraphQL error: Field 'paginatedTree' doesn't exist on type 'Repository'

14.4.1 and 14.4.2

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

14.4.0

Linux package installations

  • In GitLab 14.4, the provided Grafana version is 7.5, this is a downgrade from the Grafana 8.1 version introduced in GitLab 14.3. This was reverted to an Apache-licensed Grafana release to allow time to consider the implications of the newer AGPL-licensed releases.

    Users that have customized their Grafana install with plugins or library panels may experience errors in Grafana after the downgrade. If the errors persist after a Grafana restart you may need to reset the Grafana db and re-add the customizations. The Grafana database can be reset with sudo gitlab-ctl reset-grafana.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

14.3.0

  • Instances running 14.0.0 - 14.0.4 should not upgrade directly to GitLab 14.2 or later.

  • Ensure batched background migrations finish before upgrading to 14.3.Z from earlier GitLab 14 releases.

  • GitLab 14.3.0 contains post-deployment migrations to address Primary Key overflow risk for tables with an integer PK for the tables listed below:

    If the migrations are executed as part of a no-downtime deployment, there's a risk of failure due to lock conflicts with the application logic, resulting in lock timeout or deadlocks. In each case, these migrations are safe to re-run until successful:

    # For Omnibus GitLab
    sudo gitlab-rake db:migrate
    
    # For source installations
    sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
  • After upgrading to 14.3, ensure that all the MigrateMergeRequestDiffCommitUsers background migration jobs have completed before continuing with upgrading to GitLab 14.5 or later. This is especially important if your GitLab instance has a large merge_request_diff_commits table. Any pending MigrateMergeRequestDiffCommitUsers background migration jobs are foregrounded in GitLab 14.5, and may take a long time to complete. You can check the count of pending jobs for MigrateMergeRequestDiffCommitUsers by using the PostgreSQL console (or sudo gitlab-psql):

    select status, count(*) from background_migration_jobs
    where class_name = 'MigrateMergeRequestDiffCommitUsers' group by status;

    As jobs are completed, the database records change from 0 (pending) to 1. If the number of pending jobs doesn't decrease after a while, it's possible that the MigrateMergeRequestDiffCommitUsers background migration jobs have failed. You can check for errors in the Sidekiq logs:

    sudo grep MigrateMergeRequestDiffCommitUsers /var/log/gitlab/sidekiq/current | grep -i error

    If needed, you can attempt to run the MigrateMergeRequestDiffCommitUsers background migration jobs manually in the GitLab Rails Console. This can be done using Sidekiq asynchronously, or by using a Rails process directly:

    • Using Sidekiq to schedule jobs asynchronously:

      # For the first run, only attempt to execute 1 migration. If successful, increase
      # the limit for subsequent runs
      limit = 1
      
      jobs = Gitlab::Database::BackgroundMigrationJob.for_migration_class('MigrateMergeRequestDiffCommitUsers').pending.to_a
      
      pp "#{jobs.length} jobs remaining"
      
      jobs.first(limit).each do |job|
        BackgroundMigrationWorker.perform_in(5.minutes, 'MigrateMergeRequestDiffCommitUsers', job.arguments)
      end

      NOTE: The queued jobs can be monitored using the Sidekiq admin panel, which can be accessed at the /admin/sidekiq endpoint URI.

    • Using a Rails process to run jobs synchronously:

      def process(concurrency: 1)
        queue = Queue.new
      
        Gitlab::Database::BackgroundMigrationJob
          .where(class_name: 'MigrateMergeRequestDiffCommitUsers', status: 0)
          .each { |job| queue << job }
      
        concurrency
          .times
          .map do
            Thread.new do
              Thread.abort_on_exception = true
      
              loop do
                job = queue.pop(true)
                time = Benchmark.measure do
                  Gitlab::BackgroundMigration::MigrateMergeRequestDiffCommitUsers
                    .new
                    .perform(*job.arguments)
                end
      
                puts "#{job.id} finished in #{time.real.round(2)} seconds"
              rescue ThreadError
                break
              end
            end
          end
          .each(&:join)
      end
      
      ActiveRecord::Base.logger.level = Logger::ERROR
      process

      NOTE: When using Rails to execute these background migrations synchronously, make sure that the machine running the process has sufficient resources to handle the task. If the process gets terminated, it's likely due to insufficient memory available. If your SSH session times out after a while, it might be necessary to run the previous code by using a terminal multiplexer like screen or tmux.

  • When Maintenance mode is enabled, users cannot sign in with SSO, SAML, or LDAP.

    Users who were signed in before Maintenance mode was enabled, continue to be signed in. If the administrator who enabled Maintenance mode loses their session, then they can't disable Maintenance mode via the UI. In that case, you can disable Maintenance mode via the API or Rails console.

    This bug was fixed in GitLab 14.5.0 and backported into 14.4.3 and 14.3.5.

  • You may see the following error when setting up two factor authentication (2FA) for accounts that authenticate using an LDAP password:

    You must provide a valid current password
  • If you encounter the error, I18n::InvalidLocale: :en is not a valid locale, when starting the application, follow the patching process. Use 122978 as the mr_iid.

Self-compiled installations

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • There is an issue in GitLab 14.2 through 14.7 that affects Geo when the GitLab-managed object storage replication is used, causing blob object types to fail synchronization.

    Since GitLab 14.2, verification failures result in synchronization failures and cause a resynchronization of these objects.

    As verification is not yet implemented for files stored in object storage (see issue 13845 for more details), this results in a loop that consistently fails for all objects stored in object storage.

    For information on how to fix this, see Troubleshooting - Failed syncs with GitLab-managed object storage replication.

  • We found an issue where the container registry replication wasn't fully working if you used multi-arch images. In case of a multi-arch image, only the primary architecture (for example amd64) would be replicated to the secondary site. This has been fixed in GitLab 14.3 and was backported to 14.2 and 14.1, but manual steps are required to force a re-sync.

    You can check if you are affected by running:

    docker manifest inspect <SECONDARY_IMAGE_LOCATION> | jq '.mediaType'

    Where <SECONDARY_IMAGE_LOCATION> is a container image on your secondary site. If the output matches application/vnd.docker.distribution.manifest.list.v2+json (there can be a mediaType entry at several levels, we only care about the top level entry), then you don't need to do anything.

    Otherwise, for each secondary site, on a Rails application node, open a Rails console, and run the following:

    list_type = 'application/vnd.docker.distribution.manifest.list.v2+json'
    
    Geo::ContainerRepositoryRegistry.synced.each do |gcr|
      cr = gcr.container_repository
      primary = Geo::ContainerRepositorySync.new(cr)
      cr.tags.each do |tag|
        primary_manifest = JSON.parse(primary.send(:client).repository_raw_manifest(cr.path, tag.name))
        next unless primary_manifest['mediaType'].eql?(list_type)
    
        cr.delete_tag_by_name(tag.name)
      end
      primary.execute
    end

    If you are running a version prior to 14.1 and are using Geo and multi-arch containers in your container registry, we recommend upgrading to at least GitLab 14.1.

14.2.0

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • There is an issue in GitLab 14.2 through 14.7 that affects Geo when the GitLab-managed object storage replication is used, causing blob object types to fail synchronization.

    Since GitLab 14.2, verification failures result in synchronization failures and cause a resynchronization of these objects.

    As verification is not yet implemented for files stored in object storage (see issue 13845 for more details), this results in a loop that consistently fails for all objects stored in object storage.

    For information on how to fix this, see Troubleshooting - Failed syncs with GitLab-managed object storage replication.

  • We found an issue where the container registry replication wasn't fully working if you used multi-arch images. In case of a multi-arch image, only the primary architecture (for example amd64) would be replicated to the secondary site. This has been fixed in GitLab 14.3 and was backported to 14.2 and 14.1, but manual steps are required to force a re-sync.

    You can check if you are affected by running:

    docker manifest inspect <SECONDARY_IMAGE_LOCATION> | jq '.mediaType'

    Where <SECONDARY_IMAGE_LOCATION> is a container image on your secondary site. If the output matches application/vnd.docker.distribution.manifest.list.v2+json (there can be a mediaType entry at several levels, we only care about the top level entry), then you don't need to do anything.

    Otherwise, for each secondary site, on a Rails application node, open a Rails console, and run the following:

    list_type = 'application/vnd.docker.distribution.manifest.list.v2+json'
    
    Geo::ContainerRepositoryRegistry.synced.each do |gcr|
      cr = gcr.container_repository
      primary = Geo::ContainerRepositorySync.new(cr)
      cr.tags.each do |tag|
        primary_manifest = JSON.parse(primary.send(:client).repository_raw_manifest(cr.path, tag.name))
        next unless primary_manifest['mediaType'].eql?(list_type)
    
        cr.delete_tag_by_name(tag.name)
      end
      primary.execute
    end

    If you are running a version prior to 14.1 and are using Geo and multi-arch containers in your container registry, we recommend upgrading to at least GitLab 14.1.

14.1.0

  • Instances running 14.0.0 - 14.0.4 should not upgrade directly to GitLab 14.2 or later but can upgrade to 14.1.Z.

    It is not required for instances already running 14.0.5 (or later) to stop at 14.1.Z. 14.1 is included on the upgrade path for the broadest compatibility with self-managed installations, and ensure 14.0.0-14.0.4 installations do not encounter issues with batched background migrations.

  • Upgrading to GitLab 14.5 (or later) may take a lot longer if you do not upgrade to at least 14.1 first. The 14.1 merge request diff commits database migration can take hours to run, but runs in the background while GitLab is in use. GitLab instances upgraded directly from 14.0 to 14.5 or later must run the migration in the foreground and therefore take a lot longer to complete.

  • When Maintenance mode is enabled, users cannot sign in with SSO, SAML, or LDAP.

    Users who were signed in before Maintenance mode was enabled, continue to be signed in. If the administrator who enabled Maintenance mode loses their session, then they can't disable Maintenance mode via the UI. In that case, you can disable Maintenance mode via the API or Rails console.

    This bug was fixed in GitLab 14.5.0 and backported into 14.4.3 and 14.3.5.

  • If you encounter the error, I18n::InvalidLocale: :en is not a valid locale, when starting the application, follow the patching process. Use 123475 as the mr_iid.

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We found an issue where the container registry replication wasn't fully working if you used multi-arch images. In case of a multi-arch image, only the primary architecture (for example amd64) would be replicated to the secondary site. This has been fixed in GitLab 14.3 and was backported to 14.2 and 14.1, but manual steps are required to force a re-sync.

    You can check if you are affected by running:

    docker manifest inspect <SECONDARY_IMAGE_LOCATION> | jq '.mediaType'

    Where <SECONDARY_IMAGE_LOCATION> is a container image on your secondary site. If the output matches application/vnd.docker.distribution.manifest.list.v2+json (there can be a mediaType entry at several levels, we only care about the top level entry), then you don't need to do anything.

    Otherwise, for each secondary site, on a Rails application node, open a Rails console, and run the following:

    list_type = 'application/vnd.docker.distribution.manifest.list.v2+json'
    
    Geo::ContainerRepositoryRegistry.synced.each do |gcr|
      cr = gcr.container_repository
      primary = Geo::ContainerRepositorySync.new(cr)
      cr.tags.each do |tag|
        primary_manifest = JSON.parse(primary.send(:client).repository_raw_manifest(cr.path, tag.name))
        next unless primary_manifest['mediaType'].eql?(list_type)
    
        cr.delete_tag_by_name(tag.name)
      end
      primary.execute
    end

    If you are running a version prior to 14.1 and are using Geo and multi-arch containers in your container registry, we recommend upgrading to at least GitLab 14.1.

  • We found an issue where Primary sites cannot be removed from the UI.

    This bug only exists in the UI and does not block the removal of Primary sites using any other method.

    If you are running an affected version and need to remove your Primary site, you can manually remove the Primary site by using the Geo Sites API.

14.0.0

Prerequisites:

Long running batched background database migrations:

  • Database changes made by the upgrade to GitLab 14.0 can take hours or days to complete on larger GitLab instances. These batched background migrations update whole database tables to mitigate primary key overflow and must be finished before upgrading to GitLab 14.2 or later.

  • Due to an issue where BatchedBackgroundMigrationWorkers were not working for self-managed instances, a fix was created that requires an update to at least 14.0.5. The fix was also released in 14.1.0.

    After you update to 14.0.5 or a later 14.0 patch version, batched background migrations must finish before you upgrade to a later version.

    If the migrations are not finished and you try to upgrade to a later version, you see an error like:

    Expected batched background migration for the given configuration to be marked as 'finished', but it is 'active':

    See how to resolve this error.

Other issues:

  • In GitLab 13.3 some pipeline processing methods were deprecated and this code was completely removed in GitLab 14.0. If you plan to upgrade from GitLab 13.2 or older directly to 14.0, this is unsupported. You should instead follow a supported upgrade path.

  • When Maintenance mode is enabled, users cannot sign in with SSO, SAML, or LDAP.

    Users who were signed in before Maintenance mode was enabled, continue to be signed in. If the administrator who enabled Maintenance mode loses their session, then they can't disable Maintenance mode via the UI. In that case, you can disable Maintenance mode via the API or Rails console.

    This bug was fixed in GitLab 14.5.0 and backported into 14.4.3 and 14.3.5.

  • In GitLab 13.12.2 and later, users with expired passwords can no longer authenticate with API and Git using tokens because of the Insufficient Expired Password Validation security fix. If your users get authentication issues following the upgrade, check that their password is not expired:

    1. Connect to the PostgreSQL database and execute the following query:

      select id,username,password_expires_at from users where password_expires_at < now();
    2. If the user is in the returned list, reset the password_expires_at for that user:

      update users set password_expires_at = null where username='<USERNAME>';

Linux package installations

  • The binaries for PostgreSQL 11 and repmgr have been removed. Before upgrading, you must:

    1. Ensure the installation is using PostgreSQL 12.
    2. If using repmgr, convert to using Patroni.
  • In GitLab 13.0, sidekiq-cluster was enabled by default and the sidekiq service ran sidekiq-cluster under the hood. However, users could control this behavior using sidekiq['cluster'] setting to run Sidekiq directly instead. Users could also run sidekiq-cluster separately using the various sidekiq_cluster[*] settings available in gitlab.rb. However these features were deprecated and are now being removed.

    Starting with GitLab 14.0, sidekiq-cluster becomes the only way to run Sidekiq in Linux package installations. As part of this process, support for the following settings in gitlab.rb is being removed:

    • sidekiq['cluster'] setting. Sidekiq can only be run using sidekiq-cluster now.
    • sidekiq_cluster[*] settings. They should be set via respective sidekiq[*] counterparts.
    • sidekiq['concurrency'] setting. The limits should be controlled using the two settings sidekiq['min_concurrency'] and sidekiq['max_concurrency'].
  • In GitLab 13.0, Puma became the default web server for GitLab, but users were still able to continue using Unicorn if needed. Starting with GitLab 14.0, Unicorn is no longer supported as a webserver for GitLab and is no longer shipped with the Linux package.

    Users must migrate to Puma following the documentation to upgrade to GitLab 14.0.

  • The Consul version has been updated from 1.6.10 to 1.9.6 for Geo and multi-node PostgreSQL installs. Its important that Consul nodes be upgraded and restarted one at a time.

    For more information, see Upgrade the Consul nodes.

  • Starting with GitLab 14.0, GitLab automatically generates a password for initial administrator user (root) and stores this value to /etc/gitlab/initial_root_password.

    For more information, see Set up the initial password.

  • Two configuration options for Redis were deprecated in GitLab 13 and removed in GitLab 14:

    • redis_slave_role is replaced with redis_replica_role.
    • redis['client_output_buffer_limit_slave'] is replaced with redis['client_output_buffer_limit_replica'].

    Redis Cache nodes being upgraded from GitLab 13.12 to 14.0 that still refer to redis_slave_role in gitlab.rb will encounter an error in the output of gitlab-ctl reconfigure:

    There was an error running gitlab-ctl reconfigure:
    
    The following invalid roles have been set in 'roles': redis_slave_role

Geo installations

DETAILS: Tier: Premium, Ultimate Offering: Self-managed

  • We found an issue where Primary sites cannot be removed from the UI.

    This bug only exists in the UI and does not block the removal of Primary sites using any other method.

    If you are running an affected version and need to remove your Primary site, you can manually remove the Primary site by using the Geo Sites API.

Upgrading to later 14.Y releases